What exhaust should I run on Gen 1 3.0l

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

What exhaust should I run on Gen 1 3.0l #1054029 11/19/12 11:55 PM

Joined: Aug 2012

Posts: 46

Lexington, NC

Devilmontero Offline

Getting the Wheeling Fever

All the exhaust behind the catalytic converter is toast and needs to be replaced. I would like to give it a little sound without sounding like a bumble bee. I was wondering what exhaust you guys are running and how do you like it?

1990 LWB 3.0 Auto Tan interior Mostly Stock 194k

Entire Thread
Subject	Posted By	Posted
What exhaust should I run on Gen 1 3.0l	Devilmontero	11/19/12 11:55 PM
Re: What exhaust should I run on Gen 1 3.0l	Bernoulli	11/20/12 12:43 AM
Re: What exhaust should I run on Gen 1 3.0l	Devilmontero	11/20/12 02:47 AM
Re: What exhaust should I run on Gen 1 3.0l	Va_Stumpy	11/20/12 02:55 AM
Re: What exhaust should I run on Gen 1 3.0l	off-roader	11/20/12 12:52 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.482s Queries: 15 (3.480s) Memory: 0.6010 MB (Peak: 0.6340 MB) Data Comp: Off Server Time: 2026-06-07 10:42:06 UTC
Valid HTML 5 and Valid CSS