Hi guys, (need some experienced tech stuff)

First Problem: Engine cutting out while driving. Idles just fine.

Solution: Sent ECU for rebuild

Second Problem: Starter not engaging.

Solution: Installed new solenoid, then installed new battery

Third Problem: No spark from Coil

Solution: Installed new Dizzy

Everything works againà Taking Monty for a spinà.. Twenty minutes laterà.

Forth Problem: Engine cutting out again, but got it home before complete failureà

Solution: BURN IT???

Question:
1) Could it be my vacuum advance on my distributor?

2)Could it be a bad Dizzy ($63.00 down the drain)?

3)Could it be a bad ECU rebuild? I called AV-PRO ECM-UCM and talked to Nick. He said it could be a bad rebuild but couldnÆt say until receiving it. AV-PRO ECM-UCM wasnÆt the place I originally sent it toà. The place I sent it was Automotive Electronic Solutions in Floridaà. There goes $320 down the drainà.

Note: Plugs are new. Timing is dead on. Carb is dialed in and running great. Gas is new too.

I really feel like a <img src="/forums/images/graemlins/baby.gif" alt="" />

Have you had this problem?
single choice
Votes accepted starting: 11/21/12 01:26 AM
You must vote before you can view the results of this poll.

RockU - Federal Way, WA - 1989 Montero, New-2.6L, New-5spd, New Clutch, header, 10x15 wheels, 32x11.5x15 Mud Claw (Cardovan), 4" lift, Superwinch Hubs, Front LSD, Synch 38/38 Weber Carb, K&N filter, (Let's hit the trail!) Home Email: jondanderson2002@yahoo.com