Howdy Gang,

I am really stuck on this one...

The wires coming from the harness to the coolant temp sensor have broken off inside the connector, which in turn causes my truck to use a 1/4 tank of gas in 20 miles, as the ECU doesn't know what temp the coolant is, so it seems to assume -40 degrees or something similar.

My buddy attempted to take the connector apart and re-solder the wires, but it is not holding together, and will likely fail in the very near future, as I get an intermittent CEL with the code for the temp sensor.

The dealer I use for parts could not find anything on it, nor can I when I search in ASA. No JY's seem to have any of these motors in my area

Is there anyone who knows where I can get a new or used connector with the wires intact? Or at least a part number so I can try and track one down?

Coolant Temp Sensor Connector 95 LS 24v 3.0

The hot glue was an attempt to keep the wires from moving, but it has not:-(

As always, Gents, any help is GREATLY appreciated!

MJ