Quote
Quote
Yes, 2 per hub, and same part numbers. Timken 47s are what I used in my Gen 1 and have 4 that arrived on Friday for my Gen 2. You will also need Wheel seals which I found difficult to find in stock at the local parts stores. They ended up ordering a pair for me on my Gen 1 which took about a week. For my Gen 2 I ordered with the bearings from Rock Auto.


Where do these wheel seals go in relation to the bearings?
I assume I need 4 of those as well?

Nvm I found them on Rockauto, I love that site.


If your only doing bearings you will need 1 seal per hub. If you do the full teardown including CVs then the are 3 per side. Each one is different. Not sure of the different part numbers right now. Can look tonight after work.

  • '83 Might Max: IG @83mmax
  • '88 Raider: my OG
  • '89 Raider: rescued
  • '92 RS M/T: sold
  • '93 SR: sent to crusher
  • '05 Montero LTD: sold
  • '18 PHEV: wife's daily
  • '14 OL GT
  • http://www.tuffpans.com