Waterproof and rewireing the engine harness from the 88 starion to use for the montero! Several wires where either cut connected in a poor way or just coming apart. corrosion and oil was everywhere on this thing but used the stock heat protection then warped over that with some quality harness wrap including the backs of plugs that could be effected by water if lets say I go into some water with the montero! The starion was not designed for the possibly of floating in some water so need to improve it some! It was a wonder that the starion was running at all really with had bad a shape the harness was!

Note to all: A good Wiring harness is the backbone of any good build!!
DO NOT skimp on the harness use solder heat shrink tubes and GOOD quality harness wraps and Tape!!!

http://s1355.photobucket.com/user/L...bucket.com/user/Luke_T...215b54.jpg.html

Not compleatley finished need to integrate it into the 90 body harness (mostly Powers and interment wires).

http://s1355.photobucket.com/user/L...bucket.com/user/Luke_T...5eb1d7.jpg.html

Just sitting together mostly to see how it will look lol.

Edit:I deleted your massive image per my prior post but I did leave the URL so folks can click there to see it. Off-Roader.