knuckle arm?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: knuckle arm? [Re: Staceman] #1055358 12/21/12 04:34 PM

Joined: Aug 2003

Posts: 2,854

Toronto, Canada

Greg_Canada Offline

Roll Me Over

Yep, 2 bolts and they come off. I had to use a giant breaker bar... impact wouldn't do them... they are covered in red loc-tite... make sure to re loc-tite on installation!!!

89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim

Entire Thread
Subject	Posted By	Posted
knuckle arm?	oldsub86	12/21/12 04:39 AM
Re: knuckle arm?	4Crawler	12/21/12 07:14 AM
Re: knuckle arm?	Staceman	12/21/12 03:13 PM
Re: knuckle arm?	Greg_Canada	12/21/12 04:34 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.501s Queries: 16 (3.499s) Memory: 0.5991 MB (Peak: 0.6321 MB) Data Comp: Off Server Time: 2026-06-07 07:49:24 UTC
Valid HTML 5 and Valid CSS