2.6 Ignition upgrade options

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.6 Ignition upgrade options [Re: boostin] #1055734 01/04/13 11:46 AM

Joined: Jun 2011

Posts: 30

Alexandria, MN

PhantomSky2 Offline

Getting the Wheeling Fever

cap, rotor wires and plugs are all new and there is a slight misfire at idle. Tried messing with the ignition timing and turning it all the way to the right is the only way i can get it to improve but its still there.

Oh yeah, engine barely has 20 miles on it after the rebuild..

Last edited by PhantomSky2; 01/04/13 11:50 AM.

Entire Thread
Subject	Posted By	Posted
2.6 Ignition upgrade options	PhantomSky2	01/03/13 11:44 PM
Re: 2.6 Ignition upgrade options	boostin	01/04/13 01:47 AM
Re: 2.6 Ignition upgrade options	fasteddy	01/04/13 02:30 AM
Re: 2.6 Ignition upgrade options	boostin	01/04/13 03:01 AM
Re: 2.6 Ignition upgrade options	PhantomSky2	01/04/13 11:46 AM
Re: 2.6 Ignition upgrade options	ryany	01/04/13 06:26 PM
Re: 2.6 Ignition upgrade options	PhantomSky2	01/04/13 10:22 PM
Re: 2.6 Ignition upgrade options	boostin	01/05/13 12:35 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.443s Queries: 16 (3.440s) Memory: 0.6086 MB (Peak: 0.6416 MB) Data Comp: Off Server Time: 2026-05-30 10:20:54 UTC
Valid HTML 5 and Valid CSS