3.5L SOHC - Valve Stem Seal - Install pressure?

Print Thread

Rate Thread

Re: 3.5L SOHC - Valve Stem Seal - Install pressure? [Re: nckwltn] #1056263 07/07/13 02:19 AM

Joined: May 2013

Posts: 20

escondido, ca

zano550

Need a Spot

Hey, can anyone verify FOR SURE that the ga317 actually works on the SINGLE cam 3.5L engines? It looks like there's less room in there than the double cam 3.5s...

Mike
99 Montero 3.5l sohc. Up and running thanks to this forum...and 7500 hrs of internet research and bloody knuckles =:o
95 Miata-slot car
99 cr250 Wait, how do you adjust the valves?
78 R100/7 Ultimate driving machine

Entire Thread
Subject	Posted By	Posted
3.5L SOHC - Valve Stem Seal - Install pressure?	nckwltn	01/21/13 01:55 AM
Re: 3.5L SOHC - Valve Stem Seal - Install pressure?	nckwltn	01/21/13 01:58 AM
Re: 3.5L SOHC - Valve Stem Seal - Install pressure?	TheViper	01/21/13 04:11 AM
Re: 3.5L SOHC - Valve Stem Seal - Install pressure?	hochkis	01/21/13 04:16 AM
Re: 3.5L SOHC - Valve Stem Seal - Install pressure?	nckwltn	01/21/13 04:50 AM
Re: 3.5L SOHC - Valve Stem Seal - Install pressure?	pcc	01/21/13 12:58 PM
Re: 3.5L SOHC - Valve Stem Seal - Install pressure?	nckwltn	01/21/13 06:05 PM
Re: 3.5L SOHC - Valve Stem Seal - Install pressure?	zano550	07/07/13 02:19 AM
Re: 3.5L SOHC - Valve Stem Seal - Install pressure?	nckwltn	07/08/13 02:02 AM
Re: 3.5L SOHC - Valve Stem Seal - Install pressure?	zano550	07/08/13 05:03 AM
Re: 3.5L SOHC - Valve Stem Seal - Install pressure?	nckwltn	07/08/13 06:34 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: