Quote
My understanding... remove the plastic fender liner and you have direct access to the antenna assembly however you'll also need to disconnect it from the radio and feed the antenna wire up and out through the hole in the firewall.

Grasscat may have more insight as he's done it before with his. <img src="/forums/images/graemlins/kewl.gif" alt="" />


I did not go through the fender well because it looked like part of cover is riveted to the wheel well and could not easily remove the clips holding the wheel well in place. What's the trick for removing the buggers?

Removing the fender isn't' that hard. One screw behind the door (also a pin but just pull the fender toward front of truck to clear once unbolted), 2 screws underneath, 5ish in the engine compartment, 3 behind the marker light.

~ Jon

95 Montero SR
33 x 12.50
Aussie Locker
OME Heavy Duty Coils & Torsion Bars
ARB Front Bumper
76" Trail Gear Rock Sliders
XRC-9.5K Winch