driveshaft flange bolts

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: driveshaft flange bolts [Re: off-roader] #1057444 03/04/13 11:54 PM

Joined: Sep 2004

Posts: 4,479

Williamsport PA

StockRaider Offline

Roll Me Over

I am concerned that might be the bolt for the front driveshaft, or does the SR have the same sized front and rear? ASA marks the driveshaft they are showing the part on as FR front?

Richard E
1989 Montero - Stock-ish
1989 V6 Auto Raider - 5.3 Vortech Swap.
1987 Mitsubishi Starion 2.6t, soon to be 3.5
1983 Honda XL600R

Entire Thread
Subject	Posted By	Posted
driveshaft flange bolts	StockRaider	03/04/13 08:34 AM
Re: driveshaft flange bolts	off-roader	03/04/13 11:06 PM
Re: driveshaft flange bolts	StockRaider	03/04/13 11:54 PM
Re: driveshaft flange bolts	off-roader	03/05/13 12:43 AM
Re: driveshaft flange bolts	socalmonty	03/05/13 07:40 PM
Re: driveshaft flange bolts	off-roader	03/05/13 07:47 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.553s Queries: 16 (3.550s) Memory: 0.6044 MB (Peak: 0.6373 MB) Data Comp: Off Server Time: 2026-07-13 15:45:58 UTC
Valid HTML 5 and Valid CSS