Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
driveshaft flange bolts #1057442 03/04/13 08:34 AM
Joined: Sep 2004
Posts: 4,479
StockRaider Offline OP
Roll Me Over
***
Never got any reply from the Parts wanted section.

Long story short, I am missing 4 nuts bolts and lock washers for the driveshaft on my SR axle, they are bigger than the 89, so I need them BADLY. Anyone have some extra laying around? ASA doesn't list them <img src="/forums/images/graemlins/shiner.gif" alt="" />


Richard E
1989 Montero - Stock-ish
1989 V6 Auto Raider - 5.3 Vortech Swap.
1987 Mitsubishi Starion 2.6t, soon to be 3.5
1983 Honda XL600R
Re: driveshaft flange bolts [Re: StockRaider] #1057443 03/04/13 11:06 PM
Joined: Jan 2000
Posts: 16,227
off-roader Offline
Web Wheeler
*****
Sorry, I'd send you the bolts but I don't have any.

Are you sure it's not in CAPS/Mitsu ASA? I'm getting part numbers when I look it up. I used VIN JA4MR51M7SJ008996 which is from an SR Montero built in 94 (Prod Period 1994091-1994091).

Bolt: MB505065
Washer: MB450406
Nut: MF430122

HTH <img src="/forums/images/graemlins/kewl.gif" alt="" />

Re: driveshaft flange bolts [Re: off-roader] #1057444 03/04/13 11:54 PM
Joined: Sep 2004
Posts: 4,479
StockRaider Offline OP
Roll Me Over
***
I am concerned that might be the bolt for the front driveshaft, or does the SR have the same sized front and rear? ASA marks the driveshaft they are showing the part on as FR front?


Richard E
1989 Montero - Stock-ish
1989 V6 Auto Raider - 5.3 Vortech Swap.
1987 Mitsubishi Starion 2.6t, soon to be 3.5
1983 Honda XL600R
Re: driveshaft flange bolts [Re: StockRaider] #1057445 03/05/13 12:43 AM
Joined: Jan 2000
Posts: 16,227
off-roader Offline
Web Wheeler
*****
Whups... just realized I was on the wrong page (4 pages) and I was giving you the front driveshaft bolts (tells you at the top of that page but I missed it).

The rear ones (for a 96 anyways) are...
Bolt: MB896988 (M12x31)
Washer: MF450407 (M12)
Nut: MF430123 (M12)

It shows the diameter is an M12 but it doesn't show the thread pitch or grade.

HTH.
<img src="/forums/images/graemlins/kewl.gif" alt="" />

Re: driveshaft flange bolts [Re: off-roader] #1057446 03/05/13 07:40 PM
Joined: Oct 2003
Posts: 715
socalmonty Offline
Rock Warrior
Yeah, they are easy to tell apart if you have them both in front of you. Rear are larger than the front.


Sean - Orange County, CA
MAIL: seanwilliams78@gmail.com
1995 Montero SR - For exploring and getting away!
1994 Volvo 850 Turbo - 402hp and counting!
1966 VW Bug 2275cc - For stoplight drags!
Re: driveshaft flange bolts [Re: socalmonty] #1057447 03/05/13 07:47 PM
Joined: Jan 2000
Posts: 16,227
off-roader Offline
Web Wheeler
*****
Quote
Yeah, they are easy to tell apart if you have them both in front of you. Rear are larger than the front.


IIRC from Mitsu ASA the fronts are M10 bolts (10mm diameter).


Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 2.163s Queries: 15 (0.007s) Memory: 0.6124 MB (Peak: 0.6993 MB) Data Comp: Off Server Time: 2026-07-13 14:30:15 UTC
Valid HTML 5 and Valid CSS