'92 Montero high side service port

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

'92 Montero high side service port #1057884 03/18/13 03:32 AM

Joined: May 2011

Posts: 38

San Antonio, Tejas, USA

m4ff3w

Getting the Wheeling Fever

Where the heck is the high side service port on a '92 Montero?

It isn't on my receiver\drier. There may be a fitting on the high side manifold for the compressor - but I've never seen a metal cap like that on a service port - not sure I just want to pull it w/out verification.

Thanks yall!

92 Montero SR
84 Maserati Biturbo
89 Mercedes 190E
77 Fiat X1/9

Entire Thread
Subject	Posted By	Posted
'92 Montero high side service port	m4ff3w	03/18/13 03:32 AM
Re: '92 Montero high side service port	m4ff3w	03/18/13 02:26 PM
Re: '92 Montero high side service port	pcc	03/18/13 06:15 PM
Re: '92 Montero high side service port	m4ff3w	03/18/13 06:18 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.778s Queries: 15 (3.777s) Memory: 0.5990 MB (Peak: 0.6320 MB) Data Comp: Off Server Time: 2026-06-09 23:00:11 UTC
Valid HTML 5 and Valid CSS