Brake Line fittings

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Brake Line fittings #1059225 04/26/13 07:28 PM

Joined: Dec 2003

Posts: 201

toyomorph

Wheeler

Anyone know the secret in getting the rear brake line fittings off the rear wheel cylinders without rounding the nut or bending/twisting the line? I know to ues a good line wrench. And spraying with PB and letting sit. Would apprecite all the advice I can get.
Thanks

canyon country explorer
1993 4x PUP

Entire Thread
Subject	Posted By	Posted
Brake Line fittings	toyomorph	04/26/13 07:28 PM
Re: Brake Line fittings	4Crawler	04/27/13 12:28 AM
Re: Brake Line fittings	toyomorph	04/27/13 12:52 AM
Re: Brake Line fittings	toyomorph	04/27/13 12:38 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.517s Queries: 15 (3.452s) Memory: 0.5991 MB (Peak: 0.6321 MB) Data Comp: Off Server Time: 2026-07-15 12:26:23 UTC
Valid HTML 5 and Valid CSS