Auto 2.6 Crank insert (need measurement)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Auto 2.6 Crank insert (need measurement) [Re: Lizzord30] #1059293 04/30/13 02:14 AM

Joined: Oct 2002

Posts: 403

Grand Rapids, Michigan

Lizzord30

Mudrunner

well had one made 1 inch thick hope that is good enof.

89 Monturbo (RIP now but the heart is in the 90!)
90 Montero with 2.6 turbo swap! (close to finished)
88 Starion MPI T3/T4 Magna M8 head.....
96 Volvo 850

Entire Thread
Subject	Posted By	Posted
Auto 2.6 Crank insert (need measurement)	Lizzord30	04/29/13 01:14 AM
Re: Auto 2.6 Crank insert (need measurement)	Lizzord30	04/30/13 02:14 AM
Re: Auto 2.6 Crank insert (need measurement)	zarktheshark	05/12/13 07:56 PM
Re: Auto 2.6 Crank insert (need measurement)	Lizzord30	05/12/13 08:41 PM
Re: Auto 2.6 Crank insert (need measurement)	TainterRacing	05/12/13 10:28 PM
Re: Auto 2.6 Crank insert (need measurement)	zarktheshark	05/16/13 05:09 AM
Re: Auto 2.6 Crank insert (need measurement)	haztoys	05/26/13 06:30 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.536s Queries: 16 (3.534s) Memory: 0.6038 MB (Peak: 0.6368 MB) Data Comp: Off Server Time: 2026-06-05 06:21:03 UTC
Valid HTML 5 and Valid CSS