Quote
An inexpensive option for your lift would be to install aftermarket rear springs (I think I've read Gen2 LWB springs will also work), and crank the torsion bars up front. This is what I had done on my '91. I had 32's on that truck.

His is an 87 which has leaf springs which came with all 4 cylinder gas models so a gen II spring setup won't work since the gen II's are all coil sprung. <img src="/forums/images/graemlins/frown.gif" alt="" />

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page