|
|
|
|
Re: WTB- 3.0 12V V6 Noise Filter
[Re: Ataki]
#1059516
05/15/13 07:19 PM
|
Joined: Mar 2006
Posts: 749
Rock Warrior
|
I have several coil pack/power transistor units in my stores. They are all still mounted to the mount plate with the condenser and noise filter youre referring too.
Ive only bench tested a few power transistors in the lot before, never the filters. I could send 1, 2 or more of the noise filters - but I cant really vouch for their condition until I look through the manual and see if there's an ohm/resistance check that can be done on the bench for these.
Jim
89 Montero LS 3.0L/Auto 90 MightyMax 2.4L/Man
Parted/gone - parts available! 89 Montero LS 3.0L/Auto [Blue/Blue] (2 of 2) 89 Conquest SHP 88 Conquest SHP 87 Dodge Raider 2.6L/Auto 91 Montero RS 3.0L/Auto
Others: 37 Lincoln
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.509s Queries: 16 (3.507s) Memory: 0.6044 MB (Peak: 0.6374 MB) Data Comp: Off Server Time: 2026-06-04 00:40:32 UTCValid HTML 5 and Valid CSS