DIY .22

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: DIY .22 [Re: stony-man] #1059548 05/08/13 04:05 PM

Joined: Feb 2000

Posts: 6,247

Bel Buckle, TN

4x4Wire

Trail Leader

I assume you are referencing the guy that used a 3D printer to build a plastic gun. Fox News ran a couple segments on it.

The guy proved a point and is labeled an anarchist.

John Stewart
Editor - 4x4Wire.com
Editor - 4x4Voice
Editor - MUIRNet-News
President - BlueRibbon Coalition

Entire Thread
Subject	Posted By	Posted
DIY .22	stony-man	05/07/13 01:23 PM
Re: DIY .22	off-roader	05/07/13 05:34 PM
Re: DIY .22	4x4Wire	05/08/13 04:05 PM
Re: DIY .22	stony-man	05/16/13 06:53 PM
Re: DIY .22	4x4Wire	05/17/13 07:14 AM
Re: DIY .22	TOASTY	05/17/13 07:24 PM
Re: DIY .22	JohnnyBfromPeoria	05/18/13 03:31 AM
Re: DIY .22	TOASTY	05/20/13 06:24 PM

Moderated by 4x4Wire, 52degrees, Adam F, Axe Man, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.527s Queries: 16 (3.525s) Memory: 0.6084 MB (Peak: 0.6414 MB) Data Comp: Off Server Time: 2026-06-12 19:54:09 UTC
Valid HTML 5 and Valid CSS