In Fender Snorkel Kit. Garage built

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: In Fender Snorkel Kit. Garage built [Re: 4runnernomore] #1059633 05/13/13 03:59 AM

Joined: Nov 2011

Posts: 10

Eugene Oregon

E30Newbie

Need a Spot

Thanks guys. Excellent questions here. I am replacing the fender metal this weekend. I did cut out a hole in it and missed the hole, got pissed and cut the damn thing out... LOL

The material removed will be replaced but I have no structural worries.

Everet, the tube was bent at the local exhaust shop. It's not mandral but I'm not too worries about the krinkle. The tube is 2 1/4 ID

Thanks for the props guys

Last edited by E30Newbie; 05/13/13 04:04 AM.

Entire Thread
Subject	Posted By	Posted
In Fender Snorkel Kit. Garage built	E30Newbie	05/11/13 09:24 PM
Re: In Fender Snorkel Kit. Garage built	Everet	05/11/13 11:30 PM
Re: In Fender Snorkel Kit. Garage built	4runnernomore	05/12/13 01:54 AM
Re: In Fender Snorkel Kit. Garage built	E30Newbie	05/13/13 03:59 AM
Re: In Fender Snorkel Kit. Garage built	Runt313	05/15/13 05:43 PM
Re: In Fender Snorkel Kit. Garage built	DRX350	05/16/13 05:19 PM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.582s Queries: 16 (3.464s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-05-30 12:32:19 UTC
Valid HTML 5 and Valid CSS