|
|
|
|
Re: Valve job questions (3.0L 12v)
[Re: fasteddy]
#1059937
05/22/13 02:27 AM
|
Joined: Mar 2003
Posts: 2,324
Body Damage is Cool
|
great write up fasteddy. I'm gonna print this out on real 3 dementional paper.
i looked on alldata and for the 92-97 Hyundai Sonata (exact same engine) they revised torque again ,and up to 83 ft. lbs.
I figure I'l be visiting the inside of my 3.0 again as I have yet to shorten and retorque the drivers side. I didn't know (it hard to believe I don't know everything)that about the hatchmarks and amount of the step.
dave h. '89 Raider V6 5spd;Aisin Hubs;; Gen2 LS: frt. brakes, rear coils;U.C.arms;R.trailing arms;idler arm; rear LSD axle w.disc brakes ;2 battery system for Dog's fan; relocated ECU; custom bumpers;J.Baker receiver;Conferr roofrack; t-bar crank.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.521s Queries: 16 (3.519s) Memory: 0.6041 MB (Peak: 0.6371 MB) Data Comp: Off Server Time: 2026-06-12 03:34:18 UTCValid HTML 5 and Valid CSS