Rear Door Hing help........

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rear Door Hing help........ [Re: MontyMcV] #1060081 06/24/13 03:15 AM

Joined: Apr 2008

Posts: 441

Petoskey, Michiagan

TainterRacing Offline

Mudrunner

I removed it drilled it out used 1/4in then up to a 3/8in and then after I got all the OEM stuff out I over bored it with a 1/2in and put a long 1/2 bolt in there. I removed the threads so its just a pin. Works great.

1997 Montero LS with a motor swap a 1990 V6 12valve ported heads full 2.5in Ex I run stock tire size for Daily use, off road have 33x12.5 working on going trubo.

Entire Thread
Subject	Posted By	Posted
Rear Door Hing help........	TainterRacing	05/27/13 03:36 AM
Re: Rear Door Hing help........	Czd3my	05/27/13 04:22 AM
Re: Rear Door Hing help........	MontyMcV	05/29/13 01:30 AM
Re: Rear Door Hing help........	kpytoi9	05/30/13 08:17 PM
Re: Rear Door Hing help........	MontyMcV	05/31/13 02:20 AM
Re: Rear Door Hing help........	TainterRacing	06/24/13 03:15 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.778s Queries: 16 (3.564s) Memory: 0.6031 MB (Peak: 0.6361 MB) Data Comp: Off Server Time: 2026-06-10 04:03:01 UTC
Valid HTML 5 and Valid CSS