|
|
|
|
 Toyota T100 SAS spring question
#1060814
06/19/13 04:03 PM
|
Joined: Apr 2013
Posts: 15
OP
Need a Spot
|
I am doing an SAS on my 96 Toyota T100 SR5 3.4L V6. I am going to run a set of Dana 60's with 5.13 gears and 37's. The truck itself weighs roughly 4000lb. I am thinking roughly 7 inches of lift in total in order to allow for the springs to settle and still maintain clearance.
Here is my dilemma... I am not sure what springs to run. I have heard good and bad things about Alcan but they seem to be the best price for custom springs. I have only heard good things about Atlas spring but their prices were high. I have looked at AllPro and Trailgear but I have heard mixed things about these as well. I haven't been able to find Marlin springs but I have heard good things about them.
What do you guys think or suggest?
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 4.425s Queries: 14 (0.003s) Memory: 0.5816 MB (Peak: 0.6217 MB) Data Comp: Off Server Time: 2026-05-25 16:22:19 UTCValid HTML 5 and Valid CSS 
