Please help ID this part?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Please help ID this part? #1061751 07/06/13 11:28 PM

Joined: Sep 2012

Posts: 25

Brooklyn, NY

rolands88

Getting the Wheeling Fever

Intake manifold from my '88 Montero 2.6L.
The sensor(?) circled below is the part in question.
There were two vacuum ports that were brittle and broke off.
Any help would be greatly appreciated!
[Linked Image]

Last edited by rolands88; 07/06/13 11:29 PM.

Entire Thread
Subject	Posted By	Posted
Please help ID this part?	rolands88	07/06/13 11:28 PM
Re: Please help ID this part?	rolands88	07/06/13 11:36 PM
Re: Please help ID this part?	rxinhed	07/07/13 12:38 AM
Re: Please help ID this part?	PHIL_	07/08/13 06:13 AM
Re: Please help ID this part?	TrailRaider	07/09/13 05:02 AM
Re: Please help ID this part?	fasteddy	07/09/13 05:18 AM
Re: Please help ID this part?	Fujisawa_Rob	07/09/13 02:19 PM
Re: Please help ID this part?	rolands88	07/16/13 07:01 PM
Re: Please help ID this part?	off-roader	07/16/13 08:51 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.506s Queries: 15 (3.504s) Memory: 0.6110 MB (Peak: 0.6440 MB) Data Comp: Off Server Time: 2026-06-07 04:29:29 UTC
Valid HTML 5 and Valid CSS