be sure you have your digi cam handy and are taking lots and lots of photos of where everything goes!

I shot a bunch of videos doing the work a few month back... I'll make some quick edits and post something up in the next couple of days.

Unfortunately my memory card ran out when I was actually getting the rope down into the cylinder, so I don't have video of that... but I might re-shoot something to give a good idea of what process I used.


I think using the compressor is a bad idea unless you REALLY know what you're doing. The nice thing about the rope is that you can stop the project close the hood, come back to in in a weeks time, and everything is ready to start again where you left it. Even with 6 foot of rope in the cylinder cavity.