Aftermarket Oil Pressure Gauge for G54b

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Aftermarket Oil Pressure Gauge for G54b [Re: MainstreaM] #1062480 07/29/13 03:07 PM

Joined: Oct 2011

Posts: 116

Georgia

jonboyb

Wheeler

I think there is also a minimal pitch difference to the threads too....like -27 vs. -28. It's not much and a brass fitting would likely distort enough that it wouldn't matter.

1989 Nevada Sand Raider 2.6 5-speed
Turbo FI with Megasquirt

Entire Thread
Subject	Posted By	Posted
Aftermarket Oil Pressure Gauge for G54b	jonboyb	07/29/13 01:02 PM
Re: Aftermarket Oil Pressure Gauge for G54b	MainstreaM	07/29/13 01:54 PM
Re: Aftermarket Oil Pressure Gauge for G54b	jonboyb	07/29/13 03:07 PM
Re: Aftermarket Oil Pressure Gauge for G54b	rxinhed	07/30/13 12:31 AM
Re: Aftermarket Oil Pressure Gauge for G54b	fasteddy	07/30/13 02:01 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.484s Queries: 16 (3.481s) Memory: 0.6015 MB (Peak: 0.6345 MB) Data Comp: Off Server Time: 2026-06-10 00:01:49 UTC
Valid HTML 5 and Valid CSS