That's cool! He probably bought it thinking he could use it for his toyota.

In the middle of your dash on top there's a little vent looking plastic piece. It comes off and you can fish the wiring harness connector up through that hole to plug into your gauge pod.

Then you simply need to screw the pod in place and you're pretty much done. I don't recall if there are already captive nuts in the dash for it under the paint but I would think it's possible but maybe someone else knows.

If not, you can easily drill 2 holes and use sheet metal screws to hold down the pod. Just don't over tighten the screws down since the pod's plastic base is probably very brittle with age. <img src="/forums/images/graemlins/kewl.gif" alt="" />