|
|
|
|
 Front Hub Removal on a Gen1
#1062619
08/01/13 11:35 PM
|
Joined: Oct 2011
Posts: 116
OP
Wheeler
|
Anybody discovered a handy way to remove/re-torque the front hub lock ring without Mitsubishi's special tool? Removal should be a breeze but I think the manual calls for a 100+ ft-lb re-torque on installation (then backed off to like 25)
1989 Nevada Sand Raider 2.6 5-speed
Turbo FI with Megasquirt
|
|
|
Re: Front Hub Removal on a Gen1
[Re: jonboyb]
#1062620
08/02/13 12:43 AM
|
Joined: Jan 2001
Posts: 13,649
Web Wheeler
|
gm 3/4T lockring socket with all but 2 prongs cut off
Not responsible for advice not taken...
|
|
|
Re: Front Hub Removal on a Gen1
[Re: fasteddy]
#1062621
08/02/13 01:48 AM
|
Joined: Oct 2011
Posts: 116
OP
Wheeler
|
|
1989 Nevada Sand Raider 2.6 5-speed
Turbo FI with Megasquirt
|
|
|
Re: Front Hub Removal on a Gen1
[Re: jonboyb]
#1062622
08/03/13 05:49 PM
|
Joined: Dec 2007
Posts: 2,348
Body Damage is Cool
|
I took the lock ring off and took it with me to the parts store to ensure I got the right one.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 4.349s Queries: 15 (0.003s) Memory: 0.5999 MB (Peak: 0.6554 MB) Data Comp: Off Server Time: 2026-06-07 13:01:34 UTCValid HTML 5 and Valid CSS 
