Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Gen1: part number for AC pulley bearing [Re: rxinhed] #1062822 08/23/13 03:26 PM
Joined: Jul 2003
Posts: 33
C
cirrus Offline
Getting the Wheeling Fever
If its the idler bearing for the AC belt you are after, try the local industrial bearing supply house. Mine needed replacement several years ago and the local bearing supply place had it in stock, It has been working for last 200K miles or so.

Was only a few bucks and since they are a fairly small supplier it must have been a relatively common bearing.

hope this helps


1987 Raider/Silver/5speed/AC/Off road package
356K miles/owned since new/daily driver
Re: Gen1: part number for AC pulley bearing [Re: zarktheshark] #1062823 08/23/13 03:29 PM
Joined: May 2001
Posts: 4,079
lordtrunks Offline
Roll Me Over
*****
when mine was bad i just pulled the pulley took it down to napa they put a caliper on it then went in the back grabbed one came out hammered mine out and pressed the new one in. So try napa


89 2 dr turbo diesel
89/88 "Backwoods sas"
Re: Gen1: part number for AC pulley bearing [Re: zarktheshark] #1062824 08/23/13 09:41 PM
Joined: May 2009
Posts: 56
8
87Raider Offline
Getting the Wheeling Fever
when I get home from work i'll look in my Raider folder for the part#,, I got one for CAP here in Vegas,, Like 9 bucks I think.

Re: Gen1: part number for AC pulley bearing [Re: 87Raider] #1062825 08/24/13 02:58 AM
Joined: May 2009
Posts: 56
8
87Raider Offline
Getting the Wheeling Fever
The invoice says: BGS 203-FF, from Charleston Auto Parts in Las Vegas 702-646-2111

Re: Gen1: part number for AC pulley bearing [Re: 87Raider] #1062826 09/01/13 02:37 AM
Joined: Dec 2008
Posts: 659
zarktheshark Offline OP
Rock Warrior
*****
I just got back from vacation and used your info to find the bearing local. Napa didn't seem to have it, but Oreily's did. Looks like 203FF is the part number that everyone uses. Thanks all for the help.


'88 Raider. 2.6L dead...2.4L swap in progress, AT, 33's, 2 bouncy seat,AC, CC, 2.25 exh, 2" Tbar, 2" BL, rear DB, rear LSD,4.90's, SW hubs,gen2 uca's, KYB shocks, snorkel, elec fan, MSD.

'99 chev k3500 crewcab
'15 Subaru XV
'03 BMW i325
Re: Gen1: part number for AC pulley bearing [Re: zarktheshark] #1062827 09/09/13 09:38 PM
Joined: May 2007
Posts: 4,628
hazy_daze Offline
Roll Me Over
*****
Quote
NAPA didn't seem to have it, but O'Really's did. Looks like 203FF is the part number that everyone uses.


You got a tard behind the counter at that NAPA. It crosses to a 6203-2RSJ. I keep a crapload of them. Stupid parts people make the rest of us look bad...


Fasteddy's advice is occasionally sound...
Re: Gen1: part number for AC pulley bearing [Re: hazy_daze] #1062828 09/09/13 09:51 PM
Joined: Jan 2000
Posts: 16,227
off-roader Offline
Web Wheeler
*****
Quote
...Stupid parts people make the rest of us look brilliant...


Fixed it for ya! <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/cyclops.gif" alt="" />


Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page
Re: Gen1: part number for AC pulley bearing [Re: hazy_daze] #1062829 09/11/13 01:17 AM
Joined: Dec 2007
Posts: 2,348
Mudraider Offline
Body Damage is Cool
Thanks Larry for the part #, will be driving by the local NAPA Thursday and will hit them up for it.

Page 2 of 2 1 2







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 16 (0.004s) Memory: 0.6275 MB (Peak: 0.7260 MB) Data Comp: Off Server Time: 2026-06-10 04:00:50 UTC
Valid HTML 5 and Valid CSS