Nope, not that.

However, upon further inspection I noticed a hole in the intake. I thought, that's not right. Looked at the engine in my garage and hey presto! Swamped the part, fired it up and it runs a treated! <img src="/forums/images/graemlins/kewl.gif" alt="" /> I plugged the vacuum line because I guess it goes to the stock air cleaner assembly? It turns out that the twit who put the aftermarket air cleaner on plugged the hole with a rubber bung that must have popped out! I will put a sock air cleaner on at some point. My guess is that works much better.

[Linked Image]

Thanks for all the help <img src="/forums/images/graemlins/cheers.gif" alt="" /> I learned a lot as always <img src="/forums/images/graemlins/kewl.gif" alt="" />


'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...