Quote
Man I cant wait! I have the axle so im half way there already!!Quick question, are you running the stock caster angle for this set up? I found out how to adjust camber with shims so im good there.

Check these out..

https://www.ingallseng.com/26126-6-bolt-knuckle-camber-shim.html


Im not running stock caster angle. After seti g up my pinion angle and welding the perches i found out i had like 1 degree positive caster. I ended up cuting and turning the inner C's to adjust my caster to 6 degrees. That took a lot of banging with a big hammer.

My camber is off a little, im already planning on using those shims as well.

1988 MONTERO SWB 2.6L 5SPEEED MANUAL, 96SR LOCKED REAR, 8INCH FRONT LSD FRONT, AISIN MANUAL HUBS, CUSTOM F & R BUMPERS, ROCK SLIDERS, TUBE HALF DOORS, 9K WINCH, HOMEMADE SNORKLE, SOME OTHER STUFF.