|
|
 Jack handle placement in the Gen 1 two door
#1065318
10/28/13 05:21 PM
|
Joined: Feb 2005
Posts: 2,649
OP
Roll Me Over
|
Where is the jack handle stored in the Gen 1 two door?
Michael j
TreadLightly! Trainer
Grasscat III, 1994 Gen 2 Five speed, Stock ( for a little while )
GrassCat II, 1998 Gen 2.5 Locked and loaded. Ran off with Hector.
GrassCat I, 1991 Gen 1 Ran off with Justice.
|
|
|
Re: Jack handle placement in the Gen 1 two door
[Re: Grasscat]
#1065319
10/28/13 06:19 PM
|
Joined: Jan 2000
Posts: 16,227
Web Wheeler
|
Where is the jack handle stored in the Gen 1 two door? iirc, there are 2 clips on the carpet in the forward section that's under the rear seat. In my red one they were broken off and I bought 2 new ones at the dealer. <img src="/forums/images/graemlins/kewl.gif" alt="" />
|
|
|
Re: Jack handle placement in the Gen 1 two door
[Re: off-roader]
#1065320
10/28/13 11:14 PM
|
Joined: Feb 2005
Posts: 2,649
OP
Roll Me Over
|
I thought that also, but there is no clips and it shows no sign of there being any hole where the clips may have been.
I posted it was a Gen 1, but it's a 89 two door Raider. Maybe there is some difference between them, but I would not think so.
Michael j
TreadLightly! Trainer
Grasscat III, 1994 Gen 2 Five speed, Stock ( for a little while )
GrassCat II, 1998 Gen 2.5 Locked and loaded. Ran off with Hector.
GrassCat I, 1991 Gen 1 Ran off with Justice.
|
|
|
Re: Jack handle placement in the Gen 1 two door
[Re: Grasscat]
#1065321
10/28/13 11:24 PM
|
Joined: Feb 2001
Posts: 1,992
Body Damage is Cool
|
Yes, that is a GEN I, it goes right there. Undo the buttons and pull the carpet and you will see the holes. I find it to be a bad spot because your passengers, if any, will step right on the clips or the handle and they will brake off.
Happened to me. My fix was, do you know those nylon bags for foldable chairs? Well I got one of those, very strong let me say, and in there I keep my tow strap, my hatchet, a miniature shovel and the jack handle.
Javy
88 red Montero with the Dakar Special Edition decals, 438,000 miles (As of 7/23/2012) some occational blue puffing but still strong and counting!!! I am going ppsshhh (turbo), Stay tuned =) ...
|
|
|
Re: Jack handle placement in the Gen 1 two door
[Re: JAVYPRO]
#1065322
10/29/13 02:30 AM
|
Joined: Feb 2005
Posts: 7,458
Trail Leader
|
I may have the clips if you don't. I'll check tomorrow afternoon (-ish) and send them (in awhile, you guys know me) on if I have them. Alternately, I have some spring steel clips that are from a LUV truck (I think) that would work for you too.
|
|
|
Re: Jack handle placement in the Gen 1 two door
[Re: rxinhed]
#1065323
10/29/13 02:44 AM
|
Joined: Jan 2000
Posts: 16,227
Web Wheeler
|
I may have the clips if you don't. I'll check tomorrow afternoon (-ish) and send them (in awhile, you guys know me) on if I have them. Alternately, I have some spring steel clips that are from a LUV truck (I think) that would work for you too. Iirc on mine the clips were steel. The plastic pieces were just inserts used to mount the metal clips to.
|
|
|
Re: Jack handle placement in the Gen 1 two door
[Re: off-roader]
#1065324
10/29/13 03:13 AM
|
Joined: Feb 2001
Posts: 2,356
Body Damage is Cool
|
Somewhere I thought I saw a picture of a Gen I, 2 door with the jack handle (or something like a jack handle) attached at the very bottom of the rear bench seat.
Mitsu # 6 - 98 6G72 Montero Sport, Locking Rear Diff, Aisin Manual Hubs, 31x10.5
Mitsu # 7 - 02 6G74 Montero Limited
|
|
|
Re: Jack handle placement in the Gen 1 two door
[Re: MarkG]
#1065325
10/29/13 05:04 AM
|
Joined: Feb 2005
Posts: 7,458
Trail Leader
|
Oh yeah, and there too. The late 87 Raider I parted had that. All the others were in the rear footwell.
|
|
|
Re: Jack handle placement in the Gen 1 two door
[Re: rxinhed]
#1065326
10/29/13 05:31 AM
|
Joined: Feb 2005
Posts: 2,649
OP
Roll Me Over
|
Thanks for the offer Russell, but I have clips from the Montero's. Neither of the Raiders had them, go figure.
I will install the clips on the rear of the back seat.
Michael j
TreadLightly! Trainer
Grasscat III, 1994 Gen 2 Five speed, Stock ( for a little while )
GrassCat II, 1998 Gen 2.5 Locked and loaded. Ran off with Hector.
GrassCat I, 1991 Gen 1 Ran off with Justice.
|
|
|
Re: Jack handle placement in the Gen 1 two door
[Re: Grasscat]
#1065327
10/30/13 12:27 AM
|
Joined: Feb 2005
Posts: 7,458
Trail Leader
|
KO. <img src="/forums/images/graemlins/wink.gif" alt="" />
|
|
|
|
