I now have the 5 speed jeep ax series trans adapter(AX5 or AX15) worked out. here is the ingredients, Mitsubishi trans bell housing modified (Thanks to Paul and Russ for the hook up on mitsu the parts), Starion flywheel and pressure plate. Found that a S10 clutch will work after massive research for the proper spline count, good thing is its over the counter at every part store. And last but not least my very own custom adapter
I know there will be a lot of questions and will post a detailed thread as I have time.
Here is A sneak peek of the housing in place with NP242 tcase. cool thing is its the same length as the auto trans.