The overdrive on my 1989 V6 LWB stopped working. Grounded the thermosensor wire up on the thermostat housing. Nope. Pulled the blower box and checked the relay for corrosion. Clean. Overdrive solenoid is suspect. Question. Where is the one (pink) wire connector to the overdrive solenoid supposed to connect? The two wire connector is obvious. It is the single wire connector in this photo. It was just hanging there. Thanks.
[Linked Image]

Attached Files
1284803-MD609445.JPG (0 Bytes, 9 downloads)
Last edited by Monkeywrench; 11/03/13 12:15 AM.