i am trying to do a nice clean factory looking locker switch set up in my gen 1. there are 5 wires with the switch i got. what do they go to:
blue =
black =
yellow w/ black stripe =
green w/ white stripe =
black w/ white stripe =

I am not going to be straight wiring it to the pump. I may put a relay in the system. So if anyone know which wires I should get go to the pump and to the power supply. I can take a picture of the switch and harness if it would help.

91 Montero LS "Sandstorm", Auto, Dual Bouncy Seats, 2" Suspension lift, 2" Body Lift, GENII front IFS, 32" MT tires

89 Raider "Trailbreaker", 3.0, Auto, Dual Bouncy Seats