Quote
i am trying to do a nice clean factory looking locker switch set up in my gen 1. there are 5 wires with the switch i got. what do they go to:
blue =
black =
yellow w/ black stripe =
green w/ white stripe =
black w/ white stripe =

I am not going to be straight wiring it to the pump. I may put a relay in the system. So if anyone know which wires I should get go to the pump and to the power supply. I can take a picture of the switch and harness if it would help.

Have you tried downloading the FSM for year Montero that locker out of and reading through the wiring diagram? I know it's controlled to a degree by other electronics that confirm the xcsse is in 4L among other things...

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page