A 4cyl LSD into a 4cyl open axle is a bolt up ..

A V6 LSD into a V6 open axle is 'not' a bolt in...

But... It can be done.. But it takes pulling the diff down .. Opening the LSD and cutting the ends of the axles and the LSD block... And 'buffing back' (cut) the axles where the splines meet the axle shaft..

Any Mitsu LSD needs a restacking of the plates really.. There very loose from the factory.. Very strong when the plates are stacked 'right'

The v6 axle is over kill anyhow ..Really ...Be nice to have the disc brakes of the sport axle .. I have a 4cyl LSD restacked if you need it..

Last edited by haztoys; 12/14/13 01:23 AM.