Today i tubed the front section of my pickup, from here i'll tube from the upper front corners to the roll cage and from the lower front corners down to my rock sliders. These will be my outer fenders, i'll tie the upper and lower fender tubes together with some short notched sections of tube. I'll use some 1/16" sheet metal to skin the fenders, this will keep some of the stuff slinging off the front tires from hitting me in the face so much.

The work i did this morning i notched by hand, i put the bent tube (cut to size) in place then put my marker on the mating radius and traced it onto my piece. Cut the line with a 4.5" cutoff disc for a near perfect fit.