Two more seals down the toilet! Looks like I've got some kind of issue with the seal bore. There is a pretty good ridge that keeps peeling back the rubber of the seal you can kind of make it out in the picture. Dont know how it happened or how the old seal managed to not leak.

[url=http://www.4x4wire.com/forums/post-images//1288376-sealbore2.JPG

Today I tried heating the oil pump case up with a heat gun, coated the outer seal surface with RTV, and tried to knock down the edge of the bore but still getting the same results on every seal. I may try coating the already peeled seal with RTV and putting it back in and let it set up. Only other thing I can think of is a new front oil case.