Quote
Good point. The kit I got from Roger for my SWB came with square tube sections to bolt to the frame above the rear axle. I would assume he does the same for all his kits as needed. Of course, if you are making your own...


If you are in any way DIY inclined you really should give it a try. Cutting down a piece of poly-axle to 2" or 4" lengths and drilling a center hole in them isn't all that hard and it's not exactly aerospace accuracy that is required for it either. Just avoid using aluminium or steel for the blocks.
It also gives you braging rights when someone asks you about the lift job. <img src="/forums/images/graemlins/kewl.gif" alt="" />

1987 SWB Pajero 2.5 TDI on 31" rubber waiting for a hip replacement and bigger shoes