diy beadlocks

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

diy beadlocks #1069179 02/14/14 06:31 PM

Joined: Jan 2007

Posts: 11

york,pa

offrodeo95 Offline

Need a Spot

What brand/company makes the best diy weld in beadlock kits? Would love to have trailready or stazwork beadlocks but i cant afford them.

95 isuzu rodeo, 33in interco TSL, k&n intake, torsion bar crank and custom made shackles

81 chevy pickup, 14bolt rear w/ locker,37in interco TSL, 8in lift,3 in body lift, straight pipe exhaust. soon to have dana 60 front,and 44in boggers!

Entire Thread
Subject	Posted By	Posted
diy beadlocks	offrodeo95	02/14/14 06:31 PM
Re: diy beadlocks	4x4Wire	02/17/14 11:54 PM
Re: diy beadlocks	TOASTY	02/18/14 01:35 AM
Re: diy beadlocks	rascott	03/08/14 01:17 PM

Moderated by 4x4Wire, Dandeman, Mike Bondi

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.592s Queries: 15 (3.589s) Memory: 0.5966 MB (Peak: 0.6296 MB) Data Comp: Off Server Time: 2026-05-28 16:43:40 UTC
Valid HTML 5 and Valid CSS