Quote
Use straight 30w oil. Do the ring seating procedure. Whe you first take it out, as soon as it's warmed up, do 4-5 (ninimun) pulls in 1st gear to redline and back to idle and repeat. Full throttle pulls. This loads the rings and gets the best seal breakin.


WHOOO HOOO!!! Done!!! Engine was brought up to full operating temperature and ring seating procedure has been completed.

Now I gotta go put 10 miles on and change the engine oil and filter.

[Linked Image]

[Linked Image]

[Linked Image]

89 Raider - V6, Automatic, rear LSD, A/C Retrofit, Cruise Control Retrofit.