Backspacing for 35's

Print Thread

Rate Thread

Re: Backspacing for 35's [Re: Fujisawa_Rob] #1069585 03/26/14 02:51 PM

Joined: Jan 2005

Posts: 899

Florida

Fujisawa_Rob Offline

Rock Warrior

I found a set of 15x8.5 locally, 108mm center bore. The backspacing is only 3", will that be a problem? I don't think it will be since people are running 15x10s without issue.

2000 Mitsubishi Montero Endeavor, "Katsumi", 138k
1993 Toyota Tercel, backup vehicle, 93k
1989 Isuzu Trooper, "Beniko", R.I.P. at 233k

My 'Genuine Isuzu Parts' decals - for sale

Entire Thread
Subject	Posted By	Posted
Backspacing for 35's	Fujisawa_Rob	02/26/14 02:47 PM
Re: Backspacing for 35's	TOASTY	02/26/14 04:09 PM
Re: Backspacing for 35's	JohnnyBfromPeoria	02/26/14 10:49 PM
Re: Backspacing for 35's	Fujisawa_Rob	02/26/14 10:54 PM
Re: Backspacing for 35's	JohnnyBfromPeoria	02/27/14 03:40 AM
Re: Backspacing for 35's	Fujisawa_Rob	02/27/14 03:44 AM
Re: Backspacing for 35's	MBrannon	03/03/14 03:00 AM
Re: Backspacing for 35's	JohnnyBfromPeoria	03/03/14 05:21 AM
Re: Backspacing for 35's	Fujisawa_Rob	03/05/14 07:31 PM
Re: Backspacing for 35's	off-roader	03/05/14 07:42 PM
Re: Backspacing for 35's	Fujisawa_Rob	03/05/14 07:45 PM
Re: Backspacing for 35's	RocKrawler	03/07/14 12:39 PM
Re: Backspacing for 35's	Fujisawa_Rob	03/26/14 02:51 PM
Re: Backspacing for 35's	Fujisawa_Rob	03/27/14 03:35 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: