Transfercase wiring

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Transfercase wiring #1070768 04/09/14 07:20 PM

Joined: Mar 2008

Posts: 413

Utah

spencevans Offline

Mudrunner

I am trying to install the 4wd switches on my 1983 Mitsubishi Pickup. The wires for the switches that are in the vehicle are broken off and are of no use. I need to know how to wire the two 4wd switches. Pictures would be helpful.

Spence
1985 Mitsubishi PU 2.3 Turbo Diesel, 13" lift, Watercooled turbo, 4D56 Head, Atlas II,Fox Coilovers, Elockers,

1983 Mitsubishi PU 2.5 Turbo Diesel 4x4, fully restored

2003 G500, sliders, beadlocks, roofrack, ladder etc.

Entire Thread
Subject	Posted By	Posted
Transfercase wiring	spencevans	04/09/14 07:20 PM
Re: Transfercase wiring	fasteddy	04/10/14 12:08 AM
Re: Transfercase wiring	spencevans	04/10/14 06:10 AM
Re: Transfercase wiring	Mudraider	04/10/14 02:17 PM
Re: Transfercase wiring	spencevans	04/14/14 06:17 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.381s Queries: 15 (3.378s) Memory: 0.6000 MB (Peak: 0.6329 MB) Data Comp: Off Server Time: 2026-05-28 00:21:52 UTC
Valid HTML 5 and Valid CSS