Wanted: Tensioner and Idler pulley set for Gen 1

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Wanted: Tensioner and Idler pulley set for Gen 1 [Re: fasteddy] #1070832 04/13/14 06:26 PM

Joined: Feb 2011

Posts: 12

z0iid

Need a Spot

Thank you for that advice. I've modified my signature - is there more information that would be helpful?

1989 Dodge Raider V6

Entire Thread
Subject	Posted By	Posted
Wanted: Tensioner and Idler pulley set for Gen 1	z0iid	04/12/14 09:15 PM
Re: Wanted: Tensioner and Idler pulley set for Gen 1	fasteddy	04/13/14 01:31 AM
Re: Wanted: Tensioner and Idler pulley set for Gen 1	z0iid	04/13/14 06:26 PM
Re: Wanted: Tensioner and Idler pulley set for Gen 1	Jay Ayala	04/13/14 08:14 PM
Re: Wanted: Tensioner and Idler pulley set for Gen 1	z0iid	04/24/14 07:11 PM
Re: Wanted: Tensioner and Idler pulley set for Gen 1	MarkG	04/24/14 08:02 PM
Re: Wanted: Tensioner and Idler pulley set for Gen 1	MontyMcV	04/24/14 11:52 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.486s Queries: 16 (3.484s) Memory: 0.6052 MB (Peak: 0.6382 MB) Data Comp: Off Server Time: 2026-06-05 03:34:23 UTC
Valid HTML 5 and Valid CSS