|
|
|
|
Re: interior bed lining done gen 1
[Re: Oso]
#1071544
05/12/14 03:19 AM
|
Joined: Sep 2013
Posts: 186
OP
Wheeler
|
As you know i did mine the same way. After a couple thousand miles I've noticed that the inside fwd corner of the p/s footwell (@ the trans tunnel and firewall) has lifted a little. No big deal because it gets covered by a floor mat. It could be I put it on a little thick in the corner, but I also noticed it gets pretty warm there from the exhaust. When I get back to the US I'll trim it out and fix it. At the same time I'll find a way to put a heat shield behind the exhaust or something to help dissipate the heat - can't hurt right?
i used the al's hnr before the bed liner the hnr says it deflects heat and can withstand temps up to 500 degrees. so for i really like it and i noticed a lot less road noise but yeah when a rock gets kicked up it sounds like gun shot
Road noise on the hwy and paved roads is a little louder without carpet - but not that much more noticeable. What's your experience? I took the rig off road this weekend - desert stuff - rocks, sand, gravel. It's definitely A LOT louder without carpet. I expected as much. The maintenance - or lack thereof - is worth the extra noise.
Glad I put in a loud stereo.
Be prepared to turn it up! <img src="/forums/images/graemlins/smile.gif" alt="" />
1990 5sp lwb 274,000 miles 80,000 on new motor
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.507s Queries: 16 (3.504s) Memory: 0.6225 MB (Peak: 0.6555 MB) Data Comp: Off Server Time: 2026-06-05 13:41:30 UTCValid HTML 5 and Valid CSS