How to Tell which cam is Exhaust and which is Intake?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Mitsubishi 4x4 and SUV Tech How to Tell which cam is Exhaust and which is Intake?

Print Thread

Rate Thread

Re: How to Tell which cam is Exhaust and which is Intake? [Re: azazel] #1071854 05/21/14 05:33 PM

Joined: May 2014

Posts: 34

WI, Washington

JoeBurt

Getting the Wheeling Fever

Yeah, the drivers side cams will sit at the correct timing position but the passenger side I had to get 2 wrenches to hold them while I put the timing belt on. They should be under spring tension from the valves.

I would definitely double check the timing before you rip everything apart just in case.

Entire Thread
Subject	Posted By	Posted
How to Tell which cam is Exhaust and which is Intake?	azazel	05/21/14 02:48 PM
Re: How to Tell which cam is Exhaust and which is Intake?	TOASTY	05/21/14 04:48 PM
Re: How to Tell which cam is Exhaust and which is Intake?	JoeBurt	05/21/14 05:03 PM
Re: How to Tell which cam is Exhaust and which is Intake?	azazel	05/21/14 05:24 PM
Re: How to Tell which cam is Exhaust and which is Intake?	JoeBurt	05/21/14 05:33 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.560s Queries: 16 (3.557s) Memory: 0.6017 MB (Peak: 0.6347 MB) Data Comp: Off Server Time: 2026-06-06 22:52:03 UTC
Valid HTML 5 and Valid CSS