4D55/4D56 Crank? *DELETED*

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 4D55/4D56 Crank? [Re: spencevans] #1072177 06/19/14 11:33 PM

Joined: May 2007

Posts: 93

Mikewarme

Getting the Wheeling Fever

Quote

This seems to be a common problem with Chinese parts. They don't fit properly. I know the chinese pistons and rods are too long and they hit the head as well. When will people learn that Chinese parts are a POS.

Spencer you are so right but people will always be cheap and order their chinese garbage and than cry . Theres an original crank on ebay for $350 been there for months. DO NOT TRUST CHINESE GARBAGE.

Entire Thread
Subject	Posted By	Posted
4D55/4D56 Crank? DELETED	johnnymarvello	06/03/14 06:09 PM
Re: 4D55/4D56 Crank?	spencevans	06/03/14 07:50 PM
Re: 4D55/4D56 Crank?	Mikewarme	06/19/14 11:33 PM
Re: 4D55/4D56 Crank?	redbull	06/06/14 07:12 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.382s Queries: 16 (3.380s) Memory: 0.5986 MB (Peak: 0.6316 MB) Data Comp: Off Server Time: 2026-05-29 15:39:45 UTC
Valid HTML 5 and Valid CSS