Torsion bar stuck

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Torsion bar stuck #1072186 06/04/14 11:40 AM

Joined: Aug 2006

Posts: 75

ffountain

Getting the Wheeling Fever

My son bought a 87 extra cab with 33 X 12.50 X 15's on it. The PO had turned the torsion bars way up on it. We were trying to drop them back down and one side refuses to drop. We have taken the bolt at the rear near the tranny completely out and the front doesn't drop. Need suggestions and advice.

Thanks,
Fred

Entire Thread
Subject	Posted By	Posted
Torsion bar stuck	ffountain	06/04/14 11:40 AM
Re: Torsion bar stuck	Greg_Canada	06/04/14 07:32 PM
Re: Torsion bar stuck	ffountain	06/05/14 11:48 AM
Re: Torsion bar stuck	Greg_Canada	06/05/14 03:03 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.395s Queries: 15 (3.393s) Memory: 0.5986 MB (Peak: 0.6316 MB) Data Comp: Off Server Time: 2026-05-26 04:44:22 UTC
Valid HTML 5 and Valid CSS