MONTERO 1990 ENGINE SWAP ADVICE NEEDED

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: MONTERO 1990 ENGINE SWAP ADVICE NEEDED [Re: BottomFeeder] #1072408 06/25/14 03:57 PM

Joined: Jan 2014

Posts: 295

NYC

Malykaii

Mudrunner

Isn't the 4.3 swap also best done in a 2.6? I know the 2.6 and 3.0 trucks' frame rails up front are different widths apart.

88 Montero, StarQuest turbo, Kormex 5speed +tuff-pan w/phoenix f. stage2 clutch, 4in lift+33' tires, 4.875 lsd, short-throw shifter, Aisin hubs, SR big brakes, gen2 uca's, elantra alt, and so much more... 16g turbo w/hardpipes + 4.90 locking disk-brake axle soon (maybe lsd or aussie front??)

Entire Thread
Subject	Posted By	Posted
MONTERO 1990 ENGINE SWAP ADVICE NEEDED	BigNate66	06/13/14 05:42 PM
Re: MONTERO 1990 ENGINE SWAP ADVICE NEEDED	fasteddy	06/13/14 11:13 PM
Re: MONTERO 1990 ENGINE SWAP ADVICE NEEDED	Bernoulli	06/14/14 04:15 AM
Re: MONTERO 1990 ENGINE SWAP ADVICE NEEDED	TOASTY	06/16/14 03:04 AM
Re: MONTERO 1990 ENGINE SWAP ADVICE NEEDED	BottomFeeder	06/25/14 03:44 PM
Re: MONTERO 1990 ENGINE SWAP ADVICE NEEDED	Malykaii	06/25/14 03:57 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.486s Queries: 16 (3.484s) Memory: 0.6027 MB (Peak: 0.6356 MB) Data Comp: Off Server Time: 2026-06-17 06:12:27 UTC
Valid HTML 5 and Valid CSS