question on driveshaft flange for sr axle into 87 raider

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Mitsubishi 4x4 and SUV Tech question on driveshaft flange for sr axle into 87 raider

Print Thread

Rate Thread

Re: question on driveshaft flange for sr axle into 87 raider [Re: airbats801] #1072415 06/14/14 12:31 PM

Joined: Dec 2007

Posts: 2,348

Orange Park, FL

Mudraider

Body Damage is Cool

My SR joint was bigger than the regular u-joint.I had the driveshaft shop just join the two on a 4-cyl driveshaft. I carry a couple of each, but even running 35's I've had no issue with the Mitsu joints.

Entire Thread
Subject	Posted By	Posted
question on driveshaft flange for sr axle into 87 raider	airbats801	06/14/14 07:52 AM
Re: question on driveshaft flange for sr axle into 87 raider	Mudraider	06/14/14 12:31 PM
Re: question on driveshaft flange for sr axle into 87 raider	TOASTY	06/16/14 03:09 AM
Re: question on driveshaft flange for sr axle into 87 raider	airbats801	06/18/14 06:58 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.480s Queries: 16 (3.477s) Memory: 0.5996 MB (Peak: 0.6325 MB) Data Comp: Off Server Time: 2026-06-06 03:07:27 UTC
Valid HTML 5 and Valid CSS