what should i replace 1990 lab

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: what should i replace 1990 lab [Re: 1morebike] #1072734 07/01/14 03:38 PM

Joined: May 2006

Posts: 524

Wheeler, Oregon

Bernoulli

Rock Warrior

If you haven't done all the (water) hoses, best do it. I think I've blown them all at one time or another. The heater and bypass hoses (if equipped) are a pain without a 1/4" flex cable extension.

89 3L V6 5spd SWB, Aisin Manual Hubs, 2 (suspension) seater Raider in Wheeler, OR

Entire Thread
Subject	Posted By	Posted
what should i replace 1990 lab	1morebike	07/01/14 07:05 AM
Re: what should i replace 1990 lab	Bernoulli	07/01/14 03:38 PM
Re: what should i replace 1990 lab	fasteddy	07/02/14 12:04 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 8.914s Queries: 16 (3.594s) Memory: 0.5973 MB (Peak: 0.6302 MB) Data Comp: Off Server Time: 2026-06-12 15:17:29 UTC
Valid HTML 5 and Valid CSS